Wood Chip Hot Rotary Airflow Duct Dryer CE Approved Dryer Price Biomass Dryer

Wood Chip Hot Rotary Airflow Duct Dryer CE Approved Dryer Price Biomass Dryer

Sawdust dryer is also called pipeline dryer, wood chip flash dryer, this machine is specially designed for drying wood chips, wood shavings, wheat, straw, corn stalks and other materials.

The diameter of straw and other raw materials should be less than 3mm, and

The raw material moisture is less than 40%, and drying once can meet the requirements of the briquette production line.

Biomass Dryer Features:

² Suitable for dry materials with moisture content of 20-70%.

² Suitable for drying sawdust, rice husk, milling wheat straw, corn straw and other materials.

² Equipped with two oil-fired boilers, air inlets, steel pipes, exhaust fans (fans), air locks, and cyclone separators. Wet material enters the hopper.

² After the hot air produced by the oil-fired boiler is mixed with the wet material, it is quickly sucked into the pipeline by the exhaust fan (fan). Then the hot air flows through the curved pipe and the buffer (drying chamber) of the dryer, thus completing the drying of the wet material, and the dried material is discharged from the outlet with an air lock.

² Reduce moisture to 8-12%.

² Customers can change the angle of the dryer according to the production site.

operatePprogram:

² After the installation is complete, turn on the fan, check the rotation direction of the fan, and check whether the air suction port is normal.

² Check the flange connection for air leakage.

² Bind the bag with both ends open at the lower opening of the separator.

² Add the material to be dried at the feed port, and remove large particles before drying, which is beneficial to improve the drying speed.

² Add fuel to the stove to ignite and turn on the fan. When the temperature of the air outlet is as high as 150°C, the material is cut off and dried.

² Timely remove the bulk material at the slag outlet to facilitate feeding.